Acetic Silicone Sealant

TDS-Acetic silicone sealant 668

Description and uses:

This silicone sealant is single component, aceticcuring, indoor temperature cure, general decoration purpose, can be used on various kinds

materials, such as glass, tiles, aluminum alloy, ceramics, fiberglass, non-oil wood, etc; before using on aluminum alloy, must clean

wax coating of aluminum alloy surface by solvent.

Usage restrictive:

1. Can't be used on concrete, marble, coated glass, iron, zinc;

2. Can't be used on the surface of oily or oil oozes out, windowless places, surfaces of frosted or damp;

3. Can't be used on the material surface which is <4℃or >40℃.

4. Can't be used as structural sealant.

Working notes:

1. Users must confirm the product applicability by themselves, must do compatibility test in working place, so that confirm whether

adhesive property is good between our product and working materials. Should clean the surface of material by acetone or avantin etc

special solvent before using, and use the sealant 20 minutes after cleaning. Filling the caps fully by silicone sealant, ensure the bonding

two sides.

2. Put low viscosity adhesive tape on the position need to be protected, trim the sealant before solidifying, then remove the adhesive tape.

The sealant not solidified, could be removed by cloth or solvent(turpentine), no useful solidified sealant could be removed by knife.

Shelf Life : 12 months under 25℃from date of purchase

Volume : 280ml,310ml

Standard:GB/T14683-2003

Safety instruction:

1. Working site must be good ventilated;

2. If the sealant get into the eyes, must wash away by plenty of water and ask a doctor at once;

3. Keep all sealants out of reach of children.